Advertisement STYL’One Research Robot - Pharmaceutical Business review

Advertisement

Pharmaceutical Business review is using cookies

ContinueLearn More
Close
close icon

Medelpharm

Tabletting Technologies Made in France

More info about Medelpharm

STYL’One Research Robot

Medelpharm

Only one punch is moving on this research and development (R&D) press at a speed close to 300mm/sec.

Full control of the compression cycle is achieved through the programming of the main drive, including for pre-compression and main compression, tamping and multilayer, and dwell time.

Scientists can define the design space and then automatically perform the experiments in the most efficient way. The combination of automation and data acquisition makes set-up and easy and quick operation.

Single-layer version

This single-sided machine is fully instrumented and controls, including:

  • In-depth analysis of powder characteristics such as a sawtooth profile, pre-compressions influence and strain rate
  • Programmable dwell time from 5ms to more than two seconds.
  • Single layer tablet production with a maximum output of 900 tablets/hour
  • Hand-feed, gravity or forced-feed paddle fill shoe
  • Force/displacement/ejection on both punches optional instrumented die and/or incremental transducers
  • Radial die wall pressure measurement (optional)
  • ANALIS control and data acquisition software with the capacity of programming individual compression cycles
  • Possible connection to other lab equipment (such as scale, multi-check and hardness tester)
  • Easy disassembling and cleaning of parts
  • Main compression up to 80kN (optional)
  • Configuration for oversized tablets, from 40mm diameter and 30mm fill (optional)

Fast single-sided multi-layer press

Dosing and tamping of each layer ensures the smooth creation of tablets. A single button allows for easy weighing of each layer independently. Multilayer is increasingly utilized for therapeutics benefits. The complexity involved in producing such tablets is sensibly reduced using a Styl’One.

The multi-layer version allows in addition:

  • Easy multi-layered tableting
  • Up to five layer tablets, with up to three different powders
  • Vacuum system to prevent cross contamination between the layers
  • Core feeding for tab-in-tab (optional)
  • Small batch tablet production

In summary the STYL’ONE is the new reference for R&D tabletting research.

Quick Contact STYL’One Research Robot